Dry-wet oxygen principle flue gas humidity transmitter

Products Inquiry

Name * :

Tel * :

Email :

CompanyName :

Message :

Product Details

Dry-wet oxygen principle flue gas humidity transmitter has a high-precision temperature automatic compensation system that eliminates the effects of ambient temperature. It is with simple operation, long serving life and easy to maintain for features, etc.
Dry-wet oxygen principle flue gas humidity transmitter main features:
1.The auto-compensation system for temperature with high accuracy could eliminate the influence from environment temperature;
2.The function of pressure compensation with high accuracy could make the humidity measurement more accurate;
3.The upper and lower limits of the humidity referred to 4-20mA、0-10V output can be set freely to help users getting the analog output with higher accuracy;
4.The integrative design with built-in PID heat tracing function is easy to install and operate, and it can improve the analyzer's serving life and stability.

Dry-wet oxygen principle flue gas humidity transmitter technical parameters:

Test principle	wet-dry oxygen principle(ceramic humidity sensing)
Display mode	4 bits LED display
Test range	0 ~ 50/85(%VOL or Kpa)H₂O
Accuracy	≤±2%FS
Repeatability	≤±1%
Response time	T₉₀≤30S
Analog output	4-20mA.DC(non-isolated output, loaded resistance lower than 500 Ohm) 0-10V.DC(non-isolated output, loaded resistance higher than 10k Ohm) 1 way programmable alarm output (Dry contact type, maximum load 220VAC/2A)
Communication port	RS232(default) or RS485 one way/ two way communication port, baud rate 4800, 9600, 19200bps optional
Power supply	AC100 ~ 240V 50/60Hz
Sample gas temperature	0 ~ 170℃
Sampling mode	sample gas pass-in
Gas circuit port	NPT 1/4 internal thread
Sample gas composition	no flammable gas, no strongly corrosive gas, the dust amount less than 1mg/Nm3
Appearance Size	110mm×220mm×250mm(H×W×D)
Serving life	＞24 months (under normal use)
Install mode	wall mount

Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve and modify any information on the website from time to time without prior notice.