Small Flue Gas Humidity Analyzer

Products Inquiry

Name * :

Tel * :

Email :

CompanyName :

Message :

Product Details

Small flue gas humidity analyzer can be used under a high-temperature circumstance within 650℃ for a long time. The probe is made of special material, making its corrosion-resistance stronger.The shell of the gauge is of high-level protection and is suitable for outdoor use under extreme weather occasion.
Small flue gas humidity analyzer main features:
1.The integrative design is convenient for the installation, and reduces the influence from external interference on the measured value;
2.The imported sensor chip with original packaging guarantees the serving life of the analyzer;
3.Flange installation mode makes the installation simple and convenient;
4.Function of auto-compensation for temperature with high accuracy eliminates the influence from the environment temperature;
5.The design of two-stage dust filtration could filtrate the dust and acid liquid efficiently;
6.Simple operation, long serving life and easy to maintain.

Small flue gas humidity analyzer technical parameters:

Test principle	wet-dry oxygen principle(ceramic humidity sensing)
Display mode	4 bits LED display
Test Range	0 ~ 50/85(%VOL/KPa) H₂O
Resolution	0.01%
Accuracy	＜±2%FS
Repeatability	＜±1%
Response time	T₉₀＜20S
Operating temperature	Gauge: -10 ~ +50℃ Probe,normal type:0 ~ 350℃ High-temperature type:0 ~ 500℃ Special type:0 ~ 650℃
Sampling mode	inserting mode
Analog output	4-20mA.DC(non-isolated output, loaded resistance lower than 500 Ohm) 0-5V.DC(non-isolated output, loaded resistance higher than 10k Ohm) 1 way programmable alarm output (Dry contact type, maximum load 220VAC/2A)
Communication Port	RS232
Power supply	AC220V±10% 50/60Hz，power dissipation＜20VA
Protection	316F for feeler lever, aluminum-cast waterproof box for gauge Case (IP65)
Serving Life	gauge＞48months, sensor＞36months(under normal use)
Length of the probe	1 meter in usual(the inserting length is customizable)
Install mode	plug-in, DN65 standard flange

Disclaimer: The product introduction content (including product images, product descriptions, technical parameters, etc.) of this site is for reference only. As the update may not be timely, there will be some differences between the content and the actual situation. Please contact our sales staff to confirm. The information provided on this site does not constitute any offer or promise, and the company will improve and modify any information on the website from time to time without prior notice.